SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2 :

SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2 

ASTM A516/516M / ASME SA516/516M GRADE 60/65/70 HIC Tested (Hydrogen Induced Cracking) NACE TM-0284 2003 / NACE MR-0175 / ISO 15156-2, SSCC Tested (Sulphide Stress Corrosion Cracking) NACE TM-0177 2005 / NACE MR-0103 2007, SOHIC (Stress Oriented Hydrogen Induced Cracking) Tested FINE GRAINED PRESSURE VESSEL STEEL PLATES FOR SOUR GAS SERVICE

Hot Rolled Steel ASTM/ASME A/SA 516 Grade 60/70 HIC Tested Plates in accordance with NACE Test Method TM 0284 Latest Edition using a test solution A pH of 3 conforming to NACE TM 0177 Latest Edition
CLR : Crack Length Ratio <5% / <10% / <15%
CTR : Crack Thickness Ratio <1.5% / <3% / <1%
CSR : Crack Sensitivity Ratio <0.5% / <1% / <2%
Test Solution B with pH of 5
CLR : Crack Length Ratio <0.5%
CTR : Crack Thickness Ratio <0.1%
CSR : Crack Sensitivity Ratio <0.05%
ASME SA516/SA516M-07 MT LTV ZT Grade 60/65/70
ASTM A516/A516M-07 MT LTV ZT Grade 60/65/70
ASME Section II Part A Edition 2007 Addenda 2008 
ASME SA20/SA20M-08
ASTM A20/A20M-08
ASME SA770/SA770M-04
ASTM E290-97a
NACE MR-0175 / ISO 15156 
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment 
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated, Fully Deoxidised, Desulpherised, Dephosphorised
Charpy V-notch Impact Tested 
Size tolerance as per EN 10029:1991
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge 
Ultrasonic as per ASTM A578/578M Level A / Level B 
Grain size No.6-8 or finer acc. to ASTM E112-96
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 with IBR Form IV 

We mainly stock the Plates of following make : Salzgitter Mannesmann - Germany
ThyssenKrupp Steel - Germany
ThyssenKrupp Stahl - Germany
Dillinger Hutte - Germany
Rautaruukki - Finland
Voestalphine Grobblech - Austria
ISD HUTA - Poland 
Corus - U.K
InduSteel - France
InduSteel - Belgium
SSAB - Sweden
Sumitomo Metals - Japan
Kobe Steel - Japan
JFE Steel - Japan
Japan Steel - Japan 
Nippon Steel - Japan 

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

PLATES / SHEETS / COILS / FLAT BARS
Plates Sheets 1 mm to 300 mm thickness - Cold Rolled, Hot Rolled
SA240 Grade 304, 304L, 304H, 309, 309S, 310S, 316, 316L, 316H, 321, 321H, 347, 347H, 317L
SA240 Grade 304LN, 316LN, 317LN, 304 LN, 316 LN, 317 LN
AISI Type 309 UNS S30900, 309S UNS S30908, 309H UNS S30909, 310 UNS S31000, 310S 
UNS S31008, 310H UNS S31009, 310Si Din 1.4841, 309Si Din 1.4828 X15CrNiSi20-12 EN10095
Uginox R20-12, Cronifer 2012, Avesta 4828, Outokumpu 4828, Din-1.4828 EN-10095
SA387 Grade 2, 5, 7, 9, 11, 12, 21, 22 Cl.1, Cl.2
ASTM A36, IS 2062 Grade A, IS 2062 Grade B, SS400, S235JR, S275JR
IS 2062 E250A (Fe 410W A), E250B (Fe 410W B), E300 (Fe 440), E350 (Fe 490), E410 (Fe 540)
IS2062 E250A (Fe410W A), E250B (Fe410W B), E300 (Fe440), E350 (Fe490), E410 (Fe540)
IS 8500 Grade FE490B, IS 8500 Grade FE570B, IS8500 FE 490B, IS8500 FE 570B
SA572 Gr.50, ASTM A572 Grade 50, S355J2, S355J2+N, S355J2N, S355J0 EN10025
SA573 Grade 58, SA573 Grade 65, SA573 Grade 70, SA573-58, SA573-65, SA573-70
LRS Grade-A, ABS Grade-A, GL Grade-A, DNV Grade-A, ABS Grade-A for Shipbuilding
AH-36, DH-36, EH-36 Approved & Certified by LRS, DNV, GL, ABS
SA36, JIS G3101 SS400, DIN 17100 St44-2, S275JR, DIN 17100 St37-2, S235JR
SA283 Grade C, JIS G 3101 SS 400, DIN17100 ST44-2, S275 JR, ST 37-2, S235 JR
SA 283/SA 283M Grade A, Grade B, Grade C, Grade D for Low and Intermediate Tensile Strength
SA515 Grade 55, SA515 Grade 60, SA515 Grade 65, SA515 Grade 70, SA515 Grade 70N
SA515 Grade-55, SA515 Grade-60, SA515 Grade-65, SA515 Grade-70, SA515 Grade-70N
SA516 Grade 55, SA516 Grade 60, SA516 Grade 65, SA516 Grade 70, SA516 Grade 70N
SA516 Grade-55, SA516 Grade-60, SA516 Grade-65, SA516 Grade-70, SA516 Grade-70N
SA516/516M SA20/20M SA516 Gr.60/70 MT+LTV Normalized Impact Tested Vacuum Degassed
ASME SA516 Grade 60/70 Fully Killed, Normalized, Vacuum Degassed for Boiler & Pressure Vessel
ASME SA516-70MT LTV Normalized Condition SA516/SA516M Grade 70 MT LTV
ASME SA516-70 HIC Tested according to NACE TM-0284 SA516 Gr.70 HIC
ASME SA516 Grade 70 HIC (Hydrogen Induced Cracking) acc. to NACE TM 0284
SA516 Grade 70 NACE MR-0175 HIC & SSCC Tested, SA516-70 NACE HIC+SSCC Tested
SA516-70N Nace MR-01-75 HIC (Hydrogen Induced Cracking) & SSCC Tested
SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003, NACE MR0175 / ISO 15156-2
SA516 Grade 60/70 SSCC Tested Plates NACE TM0177-2005, NACE MR0103-2007
SA516/516M Grade 60/70 Normalized & Impact Tested for Low Temperature Service
SA515/515M Grade 60/70 acc. to SA20/20M Normalized for High Temperature Service
SA-516-70 acc. to ASME II Part A Ed.2007, SA-516-70N acc. to ASME-II Part A Edition 2007
ASME SA516/SA516M-07 MT LTV ASME SA20/20M-07 Made By BOF Process Vacuum Degassed
SA516-70 MT LTV SA20/SA20M-07 Steel Making Process Basic Oxygen Furnace (BOF) + VD
SA516 Grade 60/70 Normalized & Stress Relieved, Killed, Fine Grain, Charpy V-notch Impact Tested
API 5L X42, API 5L X46, API 5L X52, API 5L X60, API 5L X65, API 5L X70, API 5L X80
API5LX-42, API5LX-46, API5LX-52, API5LX-60, API5LX-65, API5LX-70, API5LX-80
SA537 Cl.1, SA537 Class 1, SA537 Class-1, SA537 CL.I, SA537 Cl.I
SA537 Cl.2, SA537 Class 2, SA537 Class-2, SA537 CL.II, SA537 Cl.II
SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade
ASME SA841 Grade B2, SA 841 Grade B-2, SA841 Gr.B2, SA841-B2, SA841 B2 Grade
ASTM A841 Grade B2, ASTM A841 Grade B-2, ASTM A841 Gr.B2, ASTM A841-B2 Grade
ASTM A/ASME SA841 Grade B2 HSLA for Pressure Vessels Produced by
Thermo-Mechanical Control Process (TMCP) A841/841M Grade B2
HARDOX 400, HARDOX 450, HARDOX 500, RAEX 400, RAEX 450, RAEX 500, HB400
FORA 400, FORA 450, FORA 500, ABRAZO 400, ABRAZO 450, ABRAZO 500, HB450
NICRODUR 400, NICRODUR 450, NICRODUR 500, BRINAR 400, BRINAR 450, BRINAR 500
DILLIDUR 400 V, DILLIDUR 450 V, DILLIDUR 500 V, AR400, AR450, AR500, HB500
S690QL, MAXIL 690, NAXTRA 70, DILLIMAX 690T, SUPRALSIM 690, WELDOX 700E
S700MC, DOMEX 500 MC, DOMEX 700 MC, DOMEX 100 XF, DOMEX 100XF, DOMEX XF-100
SA514 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Structural Steel
SA517 Grade B High-Yield-Strength Quenched & Tempered Alloy Steel Plate for Pressure Vessel
SAILHARD, TISCRAL, JISCRAL, LAS07 Wear Resistant Steel Abrasion Resistant Steel
TATA Steel TISTEN 52, TISTEN 55, TISTEN 55 SPL, IS 8500 Fe540B High Tensile Steel
200 BHN, 250 BHN, 400 BHN, 450 BHN, 500 BHN Wear Abrasion Resistant Steel
200 HBW, 250 HBW, 400 HBW, 450 HBW, 500 HBW Wear Abrasion Resistant Steel
ARMOX 500, ARMOX 500T, RAMOR 500, ARMOUR For Ballistic Protection
ARMOR Ballistic Steel MIL-A 46100 MIL-A12560 ARMOX 500T High Ballistic Protection
MIL A-46100 MIL A-12560 MIL-A-46100 MIL-A-12560 High Ballistic Steel Armor
Manganese Steel Plates X120Mn12 Din 1.3401, 12-14% Manganese
Hadfield Steel Plates X 120 Mn 12 Din 1.3401, 11-14% Manganese
SAILMA 300, SAILMA 300HI, SAILMA 350, SAILMA 350HI High Yield High Tensile Steel 
SAILMA 410, SAILMA 410HI, SAILMA 450, SAILMA 450HI High Yield High Tensile Steel
300Mpa, 350Mpa, 355Mpa, 410Mpa, 450Mpa, 500Mpa, 550Mpa High Yield Strength Steel
52ksi, 56ksi, 60ksi, 65ksi, 70ksi, 80ksi, 90ksi, 100ksi, 110ksi High Yield Strength Steel
S355J2+N EN 10025, EN 10029 Table 1 Class A, B, EN 10163-2 Part 2 Class I, B Subclass 1
S355J2G3 acc. to EN10025, EN10029, EN10163 Part 2 Normalized Vacuum Degassed
S355J2G3 acc. to EN10025, S355J2G3 acc. to EN 10025, S355 J2G3 EN10025
S355K2G3 acc. to EN10025, S355K2G3 acc. to EN 10025, S355 K2G3 EN10025
S355JO acc. to EN10025, S355JO acc. to EN 10025, S355 JO EN10025-2
S235JO acc. to EN10025, S235JO acc. to EN 10025, S235 JO EN10025-2
S275JO acc. to EN10025, S275JO acc. to EN 10025, S275 JO EN10025-2
S235JR acc. to EN10025, S235JR acc. to EN 10025, S235 JR EN10025-2
S355JR acc. to EN10025, S355JR acc. to EN 10025, S355 JR EN10025-2
S275JR acc. to EN10025, S275JR acc. to EN 10025, S275 JR EN10025-2
ST 52-3 acc. to EN17100, ST52-3 acc. to DIN 17100 ST52-3 DIN 17100
ST50-2, ST60-2, ST70-2 DIN 17100 ST 50-2, ST 60-2, ST 70-2 DIN17100
EN 10025-3 Grade S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL
EN 10028-3 Grade P275NH, P275NL1, P275NL2, P355N, P355NH, P355NL1
EN 10028-3 Grade P355NL2, P460NH, P460NL1, P460NL2 FINE-GRAINED STEEL
EN 10028-2 Grade P235GH, P265GH, P295GH, P355GH PRESSURE VESSEL STEEL
CORTEN A, B, C ASTM A242, ASTM A588, ASTM A871, ASTM A852, ASTM A441, IS 513
CORTEN A, CORTEN B, CORTEN C, COR-TEN A, COR-TEN B, COR-TEN C Cold Rolled Steel
Corten A Din 1.8946 EN 10025-5 S355JOWP, Corten B Din 1.8963 EN 10025-5 S355JOW S355J2W
CORTEN-A / COR-TEN A Weather Resistant Structural Steel ASTM A 242 S355J0WP S355J0WP+N
CORTEN-B / COR-TEN B Atmospheric Corrosion Resistant Steel ASTM A 588 S355J2W+N
15Mo3 acc. to EN10028-2, 15Mo3 EN 10028-3, 16Mo3 acc. to EN10028-2, 16Mo3 EN 10028-3
SA204 Grade A, SA204 Grade B, SA203 Grade A, SA203 Grade B
EN 14A, EN 14, SAE 1524, AISI 1524, EN14A, EN14 Carbon-Manganese Steel
SUP6, SUP6M, SUP7, SUP9, SUP9M, SUP10, SUP10M, SUP11A Round Edge Spring Steel Flat Bars
55Si7, 65Si7, AISI 5160, SAE 5160, AISI 6150, SAE 6150 Silicon Manganese Spring Steel Flat Bars
API-5L-X42, API-5L-X46, API-5L-X52, API-5L-X56, API-5L-X60, API-5L-X65, API-5L-X70
API 5LX-42, API 5LX-46, API 5LX-52, API 5LX-56, API 5LX-60, API 5LX-65, API 5LX-70
API 2H Grade 42, API 2H Grade 50 Carbon Manganese Steel Plate for Offshore Platform
Duplex 2205, Duplex UNS S31803, Duplex Din 1.4462 EN 10088-3, Duplex SAF2205, Duplex SAF 2205
Duplex SAF2205 SANMAC, URANUS 45N, PREN>33, PREN>34, PREN>35, PREN>36 DIN 1.4462
Super Duplex 2507, Super Duplex UNS S32750, Super Duplex SAF2507, Super Duplex SAF 2507
Super Duplex SAF2507 UNS S32750 DIN 1.4410 EN10088 URANUS 47N(+) PREN = 41 A182-F53
Super Duplex UNS S32760 F55 ASTM A182 F-55 SA182 F55 DIN 1.4501 UNS 32760

Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO10474 3.1 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS, NORSOK APPROVED STANDARD M630, M650 Rev.3