ASME Standard Specification
ASME Standard Specification
ASME Standard Specification
ASME Standard Specification, ashtapad
 ASME Standard SpecificationProduct Catalog  
 ASME Standard SpecificationPipes/Tubes
 ASME Standard SpecificationHollow Sections
 ASME Standard SpecificationFittings/Flanges
 ASME Standard SpecificationPlates/Sheets/Coils
 ASME Standard SpecificationHot Rolled Steel Plates
 ASME Standard SpecificationHot Rolled Steel Sheets
 ASME Standard SpecificationHot Rolled Coils
 ASME Standard SpecificationRods/Bars/Wires
 ASME Standard SpecificationBars For Oil & Gas
 ASME Standard SpecificationForged Round Bars
 ASME Standard SpecificationHexagon Bars
 ASME Standard SpecificationSquare Bars
 ASME Standard SpecificationCold Drawn Bars
 ASME Standard SpecificationForged Disk/Circles
 ASME Standard SpecificationStructural Steels
 ASME Standard SpecificationFlat Bars/Strips
 ASME Standard SpecificationStuds/Bolts/Nuts
 ASME Standard SpecificationThreaded Bars/Rods
 ASME Standard SpecificationFasteners
 ASME Standard SpecificationSA193 B7 Stud Bolts
 ASME Standard SpecificationSA193 B16 Stud Bolts
 ASME Standard SpecificationSA194 2H HEX NUTS
 ASME Standard SpecificationCorten Steels
 ASME Standard SpecificationSAILCOR IRSM41
 ASME Standard SpecificationSpring Steel Bars
 ASME Standard SpecificationBoiler/PVQ Plates
 ASME Standard SpecificationStructural Plates
 ASME Standard SpecificationAlloy Steel Plates
 ASME Standard SpecificationShipbuilding Plates
 ASME Standard SpecificationLRS Grade-A/B Plates 
 ASME Standard SpecificationABS Grade-A/B Plates
 ASME Standard SpecificationDNV Grade-A/B Plates
 ASME Standard SpecificationBV Grade-A/B Plates
 ASME Standard SpecificationSABS 1431:1987 Steels
 ASME Standard SpecificationQ&T Steel Plates
 ASME Standard SpecificationPlate Sizes & Grades
 ASME Standard SpecificationSA516-60/70 HIC Tested
 ASME Standard SpecificationSA516-60/70 Plates
 ASME Standard SpecificationSA515-60/70 Plates
 ASME Standard SpecificationST52-3 DIN 17100
 ASME Standard SpecificationS355J2G3 EN 10025-2
 ASME Standard SpecificationS355K2G3 EN 10025-2
 ASME Standard SpecificationS355J2+N EN 10025-2
 ASME Standard SpecificationS355K2+N EN 10025-2
 ASME Standard SpecificationEN 10025-2 Plates
 ASME Standard SpecificationEN 10028-2/3 Plates
 ASME Standard SpecificationAbrasion Resistant Steel
 ASME Standard SpecificationWear Resistant Steel
 ASME Standard SpecificationHardox 400/450 Plates
 ASME Standard SpecificationHardox 500/600 Plates
 ASME Standard SpecificationWeldox 700 Plates
 ASME Standard SpecificationSAILMA 350/350HI Plates
 ASME Standard SpecificationSAILMA 410/410HI Plates
 ASME Standard SpecificationSAILMA 450/450HI Plates
 ASME Standard SpecificationSeamless Pipes/Tubes
 ASME Standard SpecificationWelded Pipes/Tubes
 ASME Standard SpecificationERW/EFW Pipes/Tubes
 ASME Standard SpecificationSAW/HFW Pipes
 ASME Standard SpecificationASTM A234/ASME SA234
 ASME Standard SpecificationASTM A403/ASME SA403
 ASME Standard SpecificationASTM A420/ASME SA420
 ASME Standard SpecificationASTM A860/ASME SA860
 ASME Standard SpecificationLong Radius Bends
 ASME Standard SpecificationHot Induction Bends
 ASME Standard SpecificationForged Fittings
 ASME Standard SpecificationForged Flanges
 ASME Standard SpecificationAPI 5L Line Pipes
 ASME Standard SpecificationAPI 5L Gr.B PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X42 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X46 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X52 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X56 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X60 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X65 PSL1/2 Pipes
 ASME Standard SpecificationAPI 5L X70 PSL1/2 Pipes
 ASME Standard SpecificationHigh Speed Steels
 ASME Standard SpecificationCold Work Tool Steels
 ASME Standard SpecificationHot Work Tool Steels
 ASME Standard SpecificationPlastic Moulding Steels
 ASME Standard SpecificationBS970 Specifications
 ASME Standard SpecificationSAE Specifications
 ASME Standard SpecificationJIS Specifications
 ASME Standard SpecificationASTM Standard Spec
 ASME Standard SpecificationASME Standard Spec
 ASME Standard SpecificationAerospace Alloys Spec
 ASME Standard SpecificationEquivalent Grades 
 ASME Standard SpecificationEquivalent Standards 
 ASME Standard Specification Technical Specifications
 ASME Standard SpecificationDIN Material No.
 ASME Standard SpecificationMechanical Properties
 ASME Standard SpecificationChemical Composition
 ASME Standard SpecificationDensity
 ASME Standard SpecificationTrade Leads
 ASME Standard SpecificationContact Us
 ASME Standard SpecificationLinks
ASME Standard Specification
 

ASME Standard Spec :

Manufacturers, Exporters, Stockist India & Suppliers Worldwide

Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India



Ashtapad is India's one of the leading steel flanges manufacture specialize in din flanges steel flanges asme flanges stainless flanges and others products Stainless steel, Carbon steel, Alloy steel, Nickel, Other Ferrous & Non-Ferrous metals In Shape Of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners Etc.

ASME Standard Spec
ASTM STANDARD SPECIFICATION

SA1-00 Standard Specification for Carbon Steel Tee Rails
SA2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
SA3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
SA6/A6M-03c Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
SA20/A20M-02 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
SA27/A27M-03 Standard Specification for Steel Castings, Carbon, for General Application
SA29/A29M-03 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
SA31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
SA34/A34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
SA36/A36M-03a Standard Specification for Carbon Structural Steel
SA47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings
SA48/A48M-03 Standard Specification for Gray Iron Castings
SA49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
SA53/A53M-02 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
SA65-01 Standard Specification for Steel Track Spikes
SA66-01 Standard Specification for Steel Screw Spikes
SA67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
SA74-03b Standard Specification for Cast Iron Soil Pipe and Fittings
SA82-02 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
SA90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
SA99-03 Standard Specification for Ferromanganese
SA100-93(2000) Standard Specification for Ferrosilicon
SA101-93(2000) Standard Specification for Ferrochromium
SA102-93(2000) Standard Specification for Ferrovanadium
SA105/A105M-03 Standard Specification for Carbon Steel Forgings for Piping Applications
SA106-02a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
SA108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
SA109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
SA111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
SA116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
SA121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
SA123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
SA125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
SA126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
SA128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
SA131/A131M-01 Standard Specification for Structural Steel for Ships
SA132-89(2000) Standard Specification for Ferromolybdenum
SA134-96(2001) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
SA135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe
SA139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
SA143/A143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
SA144-02 Specification for Ferrotungsten
SA146-64(2000) Standard Specification for Molybdenum Oxide Products
SA148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes
SA153/A153M-03 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
SA159-83(2001) Standard Specification for Automotive Gray Iron Castings
SA167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
SA176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
SA178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
SA179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
SA181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
SA182/A182M-02 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
SA183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
SA184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
SA185-02 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
SA192/A192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
SA193/A193M-03 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
SA194/A194M-03b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
SA197/A197M-00 Standard Specification for Cupola Malleable Iron
SA202/A202M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
SA203/A203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
SA204/A204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
SA209/A209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
SA210/A210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
SA213/A213M-03b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
SA214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
SA216/A216M-93(2003) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
SA217/A217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
SA220/A220M-99 Standard Specification for Pearlitic Malleable Iron
SA225/A225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
SA227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
SA228/A228M-02 Standard Specification for Steel Wire, Music Spring Quality
SA229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
SA230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
SA231/A231M-96(2002) Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
SA232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
SA234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
SA239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
SA240/A240M-03c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
SA242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
SA247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
SA249/A249M-03a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
SA250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
SA252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
SA254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
SA255-02 Standard Test Method for Determining Hardenability of Steel
SA262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
SA263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
SA264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
SA265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
SA266/A266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
SA268/A268M-03 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA269-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
SA270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
SA275/A275M-98(2003) Standard Test Method for Magnetic Particle Examination of Steel Forgings
SA276-03 Standard Specification for Stainless Steel Bars and Shapes
SA278/A278M-01 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
SA283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
SA285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
SA288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
SA289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
SA290-02 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
SA291-03 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
SA295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel
SA297/A297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
SA299/A299M-03e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
SA302/A302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
SA304-02 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
SA307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
SA308/A308M-03 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
SA309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
SA311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
SA312/A312M-03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
SA313/A313M-03 Standard Specification for Stainless Steel Spring Wire
SA314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging
SA319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
SA320/A320M-03 Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
SA321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered
SA322-91(2001) Standard Specification for Steel Bars, Alloy, Standard Grades
SA323-93(2000) Standard Specification for Ferroboron
SA324-73(2000) Standard Specification for Ferrotitanium
SA325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
SA325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
SA327-91(1997) Standard Test Methods for Impact Testing of Cast Irons
SA327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)
SA328/A328M-03 Standard Specification for Steel Sheet Piling
SA331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
SA333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
SA334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
SA335/A335M-03 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
SA336/A336M-03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
SA338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
SA340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
SA341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
SA342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
SA343/A343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
SA345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
SA348/A348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
SA350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
SA351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
SA352/A352M-03 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
SA353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
SA354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
SA355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding
SA356/A356M-98(2003) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
SA358/A358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
SA363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
SA367-60(1999) Standard Test Methods of Chill Testing of Cast Iron
SA368-95a(2000) Standard Specification for Stainless Steel Wire Strand
SA369/A369M-02 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
SA370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
SA372/A372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
SA376/A376M-02a Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
SA377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
SA380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
SA381-96(2001) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
SA384/A384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
SA385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
SA387/A387M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
SA388/A388M-03 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
SA389/A389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
SA390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
SA391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain
SA392-03 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
SA394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
SA395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
SA400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
SA401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
SA403/A403M-03a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
SA407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
SA409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
SA411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
SA413/A413M-01 Standard Specification for Carbon Steel Chain
SA414/A414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
SA416/A416M-02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
SA417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
SA418-99(2003) Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
SA420/A420M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
SA421/A421M-02 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
SA423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
SA424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling
SA426/A426M-02 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
SA427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
SA428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
SA434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
SA435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
SA436-84(2001) Standard Specification for Austenitic Gray Iron Castings
SA437/A437M-01a Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
SA439-83(1999) Standard Specification for Austenitic Ductile Iron Castings
SA447/A447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
SA449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
SA450/A450M-03 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
SA451/A451M-02 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
SA453/A453M-03 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
SA455/A455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
SA456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
SA459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
SA460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand
SA463/A463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
SA466/A466M-01 Standard Specification for Weldless Chain
SA467/A467M-01 Standard Specification for Machine and Coil Chain
SA469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
SA470-03 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
SA471-02 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
SA472-98(2003) Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
SA473-01 Standard Specification for Stainless Steel Forgings
SA474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
SA475-98 Standard Specification for Zinc-Coated Steel Wire Strand
SA476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
SA478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
SA479/A479M-03 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
SA480/A480M-03c Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA481-94(2000) Standard Specification for Chromium Metal
SA482-93(2000) Standard Specification for Ferrochrome-Silicon
SA483-64(2000) Standard Specification for Silicomanganese
SA484/A484M-03a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
SA485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
SA487/A487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service
SA488/A488M-01e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
SA489-03 Standard Specification for Carbon Steel Lifting Eyes
SA490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
SA490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
SA491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
SA492-95(2000) Standard Specification for Stainless Steel Rope Wire
SA493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
SA494/A494M-03a Standard Specification for Castings, Nickel and Nickel Alloy
SA495-94(2000) Standard Specification for Calcium-Silicon Alloys
SA496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
SA497/A497M-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
SA498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins
SA499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
SA500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
SA501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
SA502-03 Standard Specification for Rivets, Steel, Structural
SA503/A503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts
SA504-93(1999) Standard Specification for Wrought Carbon Steel Wheels
SA505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
SA506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
SA507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
SA508/A508M-03a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
SA510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
SA510M-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
SA511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing
SA512-96(2001) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
SA513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
SA514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
SA515/A515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service       
SA516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
SA517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
SA518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
SA519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
SA521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
SA522/A522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
SA523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
SA524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
SA529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
SA530/A530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
SA531/A531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
SA532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
SA533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
SA534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings
SA536-84(1999)e1 Standard Specification for Ductile Iron Castings
SA537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
SA539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
SA540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
SA541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
SA542/A542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
SA543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
SA550-78(2000) Standard Specification for Ferrocolumbium
SA551-94(1999) Standard Specification for Steel Tires
SA553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
SA554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
SA555/A555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
SA556/A556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
SA560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy
SA561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
SA562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
SA563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
SA563-00 Standard Specification for Carbon and Alloy Steel Nuts
SA564/A564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
SA565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
SA568/A568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
SA571/A571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
SA572/A572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
SA573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness
SA574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
SA574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
SA575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
SA576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
SA577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
SA578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
SA579-01 Standard Specification for Superstrength Alloy Steel Forgings
SA580/A580M-98 Standard Specification for Stainless Steel Wire
SA581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
SA582/A582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars
SA586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
SA587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
SA588/A588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
SA589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
SA591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
SA592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
SA595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
SA596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
SA597-87(1999) Standard Specification for Cast Tool Steel
SA598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
SA599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
SA600-92a(1999) Standard Specification for Tool Steel High Speed
SA601-96(2000) Standard Specification for Electrolytic Manganese Metal
SA602-94(1998) Standard Specification for Automotive Malleable Iron Castings
SA603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
SA604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
SA606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
SA608/A608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
SA609/A609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
SA610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
SA612/A612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
SA615/A615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
SA618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
SA623-03 Standard Specification for Tin Mill Products, General Requirements
SA623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric]
SA624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
SA625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
SA626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
SA627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
SA629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
SA630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
SA632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
SA633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
SA635/A635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for
SA636-76(2000) Standard Specification for Nickel Oxide Sinter
SA638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
SA640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
SA641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
SA644-98(2003) Standard Terminology Relating to Iron Castings
SA645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
SA646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
SA648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
SA649/A649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
SA650/A650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
SA653/A653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
SA656/A656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
SA657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
SA659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
SA660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
SA662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
SA663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
SA664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
SA666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
SA667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
SA668/A668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
SA671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
SA672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
SA673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
SA674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
SA675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
SA677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
SA678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
SA679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
SA681-94(1999) Standard Specification for Tool Steels Alloy
SA682/A682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
SA683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
SA684/A684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
SA686-92(1999) Standard Specification for Tool Steel, Carbon
SA688/A688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
SA689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs
SA690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
SA691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
SA693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA694/A694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
SA696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
SA697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
SA698/A698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
SA700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
SA701-96(2000) Standard Specification for Ferromanganese-Silicon
SA702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
SA703/A703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
SA704/A704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
SA705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings
SA706/A706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
SA707/A707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
SA709/A709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
SA710/A710M-02 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
SA711-03 Standard Specification for Steel Forging Stock
SA712-97(2002) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
SA713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
SA714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
SA716-03 Standard Specification for Ductile Iron Culvert Pipe
SA717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
SA719/A719M-02 Standard Test Method for Lamination Factor of Magnetic Materials
SA720/A720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel
SA721/A721M-02 Standard Test Method for Ductility of Oriented Electrical Steel
SA722/A722M-98(2003) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
SA723/A723M-02 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
SA724/A724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
SA726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
SA727/A727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
SA729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
SA730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
SA732/A732M-02 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
SA733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
SA734/A734M-87a(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
SA735/A735M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
SA736/A736M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
SA737/A737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
SA738/A738M-03a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
SA739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
SA740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
SA741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
SA742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
SA743/A743M-03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
SA744/A744M-00e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
SA745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
SA746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
SA747/A747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
SA748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
SA749/A749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
SA750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
SA751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
SA752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
SA752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
SA753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
SA754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
SA755/A755M-01 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
SA756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
SA757/A757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
SA758/A758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
SA759-00 Standard Specification for Carbon Steel Crane Rails
SA760/A760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
SA761/A761M-03 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
SA762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
SA763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
SA764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
SA765/A765M-01 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
SA767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
SA768-95(2001) Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
SA769/A769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
SA770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
SA771/A771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
SA772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
SA773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
SA774/A774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
SA775/A775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars
SA778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
SA779/A779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
SA780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
SA781/A781M-03a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
SA782/A782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
SA786/A786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
SA787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
SA788-03a Standard Specification for Steel Forgings, General Requirements
SA789/A789M-02a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
SA790/A790M-03 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
SA792/A792M-03 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
SA793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
SA794-97(2002) Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
SA795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
SA796/A796M-03 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
SA798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
SA799/A799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
SA800/A800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
SA801/A801M-99 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650
SA802/A802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
SA803/A803M-03 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
SA804/A804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
SA805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
SA807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
SA808/A808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
SA809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
SA810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
SA811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
SA813/A813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
SA814/A814M-03 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
SA815/A815M-01a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
SA817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
SA818-91(2001) Standard Specification for Coppered Carbon Steel Wire
SA820-01 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
SA821/A821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
SA822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
SA823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
SA824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
SA826/A826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
SA827/A827M-02 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
SA829/A829M-00 Standard Specification for Alloy Structural Steel Plates
SA830/A830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
SA831/A831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
SA832/A832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
SA833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
SA834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
SA835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives
SA836/A836M-02 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
SA837/A837M-03 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
SA838-02 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
SA839-02 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
SA840/A840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel
SA841/A841M-03a Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
SA842-85(1997) Standard Specification for Compacted Graphite Iron Castings
SA844/A844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
SA845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel
SA846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
SA847-99a(2003) Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
SA848-01 Standard Specification for Low-Carbon Magnetic Iron
SA849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
SA852/A852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
SA853-93(2003) Standard Specification for Steel Wire, Carbon, for General Use
SA854/A854M-98(2003) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
SA855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
SA856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
SA857/A857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
SA858/A858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
SA859/A859M-02 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
SA860/A860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
SA861-02 Standard Specification for High-Silicon Iron Pipe and Fittings
SA862/A862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
SA865-03 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
SA866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
SA867-03 Standard Specification for Iron-Silicon Relay Steels
SA871/A871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
SA872/A872M-02 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
SA874/A874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
SA875/A875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
SA876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
SA877/A877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
SA878/A878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
SA879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
SA880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
SA881/A881M-02 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
SA882/A882M-02a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
SA883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
SA884/A884M-02 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
SA885/A885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
SA886/A886M-02 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
SA887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
SA888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
SA889/A889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
SA890/A890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
SA891-98(2003) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
SA892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
SA893/A893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
SA894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
SA895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
SA896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
SA897/A897M-03 Standard Specification for Austempered Ductile Iron Castings
SA898/A898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
SA899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated
SA900/A900M-01 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
SA901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
SA902-03 Standard Terminology Relating to Metallic Coated Steel Products
SA903/A903M-99(2003) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
SA904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
SA905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding
SA906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
SA908-03 Standard Specification for Stainless Steel Needle Tubing
SA909-03 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
SA910/A910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
SA911/A911M-02 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
SA912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
SA913/A913M-03 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
SA914/A914M-92(1999)e1 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
SA915/A915M-93(2003) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
SA917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
SA918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
SA920/A920M-02a Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
SA921/A921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
SA922-93(2000) Standard Specification for Silicon Metal
SA923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
SA924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
SA925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
SA926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
SA927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
SA928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
SA929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
SA930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
SA931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
SA932/A932M-01 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
SA933/A933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
SA934/A934M-03 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
SA937/A937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
SA938-97(2003) Standard Test Method for Torsion Testing of Wire
SA939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
SA940-96(2001) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
SA941-03 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
SA942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
SA943/A943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
SA944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
SA945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
SA946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
SA947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]
SA949/A949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
SA950/A950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
SA951-02 Standard Specification for Masonry Joint Reinforcement
SA952/A952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
SA953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
SA954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
SA955/A955M-03b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
SA956-02 Standard Test Method for Leeb Hardness Testing of Steel Products
SA957-03 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
SA958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
SA959-03 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
SA960-03 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
SA961-02 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
SA962/A962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
SA964/A964M-02 Standard Specification for Corrugated Steel Box Culverts
SA965/A965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
SA966/A966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
SA967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
SA968/A968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
SA970/A970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement
SA971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
SA972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
SA973/A973M-01 Standard Specification for Grade 100 Alloy Steel Chain
SA974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
SA975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
SA976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
SA977/A977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
SA978/A978M-97(2002)e1 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
SA979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
SA980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
SA981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
SA982-02 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
SA983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
SA984/A984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
SA985/A985M-03 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
SA986/A986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
SA987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
SA988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
SA989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
SA990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
SA991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
SA992/A992M-03 Standard Specification for Structural Steel Shapes
SA993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
SA994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
SA995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
SA996/A996M-03b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
SA997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
SA998/A998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
SA999/A999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
SA1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
SA1001-01 Standard Specification for High Strength Steel Castings in Heavy Sections
SA1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
SA1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
SA1004/A1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

 

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

 

 
 

ASME Standard Specification

CONTACT US ::

Ashtapad Overseas

102 , 1ST Floor, Siddha Shila Building.,
Near Lilawati High School, 379 S.V.P. Road ,
Mumbai- 400004 (India).


Tel : +91-22-23841700
       +91-22-67437666
       +91-22-66595333
Fax : +91-22-23868298
E- Mail : export@ashtapad.com
Web : www.ashtapadoverseas.com


ASTM A588 Grade-A CORTEN-B High Strength Round Bars
14NiCrMo13-4 DIN 1.6657 832M13 Round Bars
SAE 4130 Quenched & Tempered Hollow Tubes & Bars
SAE 4130 Q&T Seamless Mechanical Tube & Pipe
ST-52 / ST 52-3N DIN 17100 Normalized Round Bars
ASTM A537 / ASME SA537 CL.2 Q&T Pressure Vessel Plates
AISI 4130 Q&T 75K API 6A Forged Round Bars
IS 2062 E450 D/E450 E SAILMA 450 SAILMA 450HI Plates
EN30B DIN 1.6747 4S28 835M30 AFNOR 30NCD16 Round Bars
S355J2W / S355J2W+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOW / S355JOW+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOWP / S355JOWP+N EN 10025-5 DIN 1.8946 EN 10155 Plates
SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2
API 5L X60 / X65 / X70 PSL2 Plates


Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex
Trademark Notice - Some names are trade names and/or trademarks of specific manufacturers. Ashtapad Overseas, Mumbai, India is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.