Hardox 500/600 Plates
Hardox 500/600 Plates
Hardox 500/600 Plates
Hardox 500/600 Plates, ashtapad
 Hardox 500/600 PlatesProduct Catalog  
 Hardox 500/600 PlatesPipes/Tubes
 Hardox 500/600 PlatesHollow Sections
 Hardox 500/600 PlatesFittings/Flanges
 Hardox 500/600 PlatesPlates/Sheets/Coils
 Hardox 500/600 PlatesHot Rolled Steel Plates
 Hardox 500/600 PlatesHot Rolled Steel Sheets
 Hardox 500/600 PlatesHot Rolled Coils
 Hardox 500/600 PlatesRods/Bars/Wires
 Hardox 500/600 PlatesBars For Oil & Gas
 Hardox 500/600 PlatesForged Round Bars
 Hardox 500/600 PlatesHexagon Bars
 Hardox 500/600 PlatesSquare Bars
 Hardox 500/600 PlatesCold Drawn Bars
 Hardox 500/600 PlatesForged Disk/Circles
 Hardox 500/600 PlatesStructural Steels
 Hardox 500/600 PlatesFlat Bars/Strips
 Hardox 500/600 PlatesStuds/Bolts/Nuts
 Hardox 500/600 PlatesThreaded Bars/Rods
 Hardox 500/600 PlatesFasteners
 Hardox 500/600 PlatesSA193 B7 Stud Bolts
 Hardox 500/600 PlatesSA193 B16 Stud Bolts
 Hardox 500/600 PlatesSA194 2H HEX NUTS
 Hardox 500/600 PlatesCorten Steels
 Hardox 500/600 PlatesSAILCOR IRSM41
 Hardox 500/600 PlatesSpring Steel Bars
 Hardox 500/600 PlatesBoiler/PVQ Plates
 Hardox 500/600 PlatesStructural Plates
 Hardox 500/600 PlatesAlloy Steel Plates
 Hardox 500/600 PlatesShipbuilding Plates
 Hardox 500/600 PlatesLRS Grade-A/B Plates 
 Hardox 500/600 PlatesABS Grade-A/B Plates
 Hardox 500/600 PlatesDNV Grade-A/B Plates
 Hardox 500/600 PlatesBV Grade-A/B Plates
 Hardox 500/600 PlatesSABS 1431:1987 Steels
 Hardox 500/600 PlatesQ&T Steel Plates
 Hardox 500/600 PlatesPlate Sizes & Grades
 Hardox 500/600 PlatesSA516-60/70 HIC Tested
 Hardox 500/600 PlatesSA516-60/70 Plates
 Hardox 500/600 PlatesSA515-60/70 Plates
 Hardox 500/600 PlatesST52-3 DIN 17100
 Hardox 500/600 PlatesS355J2G3 EN 10025-2
 Hardox 500/600 PlatesS355K2G3 EN 10025-2
 Hardox 500/600 PlatesS355J2+N EN 10025-2
 Hardox 500/600 PlatesS355K2+N EN 10025-2
 Hardox 500/600 PlatesEN 10025-2 Plates
 Hardox 500/600 PlatesEN 10028-2/3 Plates
 Hardox 500/600 PlatesAbrasion Resistant Steel
 Hardox 500/600 PlatesWear Resistant Steel
 Hardox 500/600 PlatesHardox 400/450 Plates
 Hardox 500/600 PlatesHardox 500/600 Plates
 Hardox 500/600 PlatesWeldox 700 Plates
 Hardox 500/600 PlatesSAILMA 350/350HI Plates
 Hardox 500/600 PlatesSAILMA 410/410HI Plates
 Hardox 500/600 PlatesSAILMA 450/450HI Plates
 Hardox 500/600 PlatesSeamless Pipes/Tubes
 Hardox 500/600 PlatesWelded Pipes/Tubes
 Hardox 500/600 PlatesERW/EFW Pipes/Tubes
 Hardox 500/600 PlatesSAW/HFW Pipes
 Hardox 500/600 PlatesASTM A234/ASME SA234
 Hardox 500/600 PlatesASTM A403/ASME SA403
 Hardox 500/600 PlatesASTM A420/ASME SA420
 Hardox 500/600 PlatesASTM A860/ASME SA860
 Hardox 500/600 PlatesLong Radius Bends
 Hardox 500/600 PlatesHot Induction Bends
 Hardox 500/600 PlatesForged Fittings
 Hardox 500/600 PlatesForged Flanges
 Hardox 500/600 PlatesAPI 5L Line Pipes
 Hardox 500/600 PlatesAPI 5L Gr.B PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X42 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X46 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X52 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X56 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X60 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X65 PSL1/2 Pipes
 Hardox 500/600 PlatesAPI 5L X70 PSL1/2 Pipes
 Hardox 500/600 PlatesHigh Speed Steels
 Hardox 500/600 PlatesCold Work Tool Steels
 Hardox 500/600 PlatesHot Work Tool Steels
 Hardox 500/600 PlatesPlastic Moulding Steels
 Hardox 500/600 PlatesBS970 Specifications
 Hardox 500/600 PlatesSAE Specifications
 Hardox 500/600 PlatesJIS Specifications
 Hardox 500/600 PlatesASTM Standard Spec
 Hardox 500/600 PlatesASME Standard Spec
 Hardox 500/600 PlatesAerospace Alloys Spec
 Hardox 500/600 PlatesEquivalent Grades 
 Hardox 500/600 PlatesEquivalent Standards 
 Hardox 500/600 Plates Technical Specifications
 Hardox 500/600 PlatesDIN Material No.
 Hardox 500/600 PlatesMechanical Properties
 Hardox 500/600 PlatesChemical Composition
 Hardox 500/600 PlatesDensity
 Hardox 500/600 PlatesTrade Leads
 Hardox 500/600 PlatesContact Us
 Hardox 500/600 PlatesLinks
Hardox 500/600 Plates
 

Hardox 500/600 Plates :

Manufacturers & Exporters Hardox 500 / Hardox 600 Plate Supplier in Mumbai India

hardox 500 equivalent astm, hardox 500 equivalent, equivalent of hardox 500, hardox 550 equivalent, hardox plate equivalent, equivalente hardox 600, hardox equivalent



Ashtapad is India's one of the leading steel plate manufacture specialize in steel Sheet steel Plate steel Coil and others products products " Stainless steel, Carbon steel, Alloy steel, Nickel , Other Ferrous & Non-Ferrous metals In Shape Of steel Sheet Plate Coil Etc. Suppliers of Boiler Plate, PVQ Coils, Carbon Steel (SS) Duplex Steel Coils, Stainless Steel Coils, Alloy Steel Coils, Mild Steel Coils, Kovar Coils, Titanium Coils, Tantalum Coils, Nickel Coils, Zirconium Coils, Hastelloy Coils, Incolloy Coils, Cupro nickel Coils, Niobium Coils, Nimonics Coils, HR Alloy Coils, Alloy 20 Coils, Monel Coils, Inconel Coils, Super Duplex Coils, Duplex Steel Plates, Stainless Steel Plates, Alloy Steel Plates, Mild Steel Plates, Kovar Plates, Titanium Plates, Tantalum Plates, Nickel Plates, Zirconium Plates, Hastelloy Plates, Incolloy Plates, Cupro nickel Plates, Niobium Plates, Nimonics Plates, HR Alloy Plates, Alloy 20 Plates, Monel Plates, Inconel Plates, Super Duplex Plates Etc.
Hardox 500/600 Plates
 

Hardox 500 / Hardox 600 Plate

Hardox 500 Hardness 500HB / Hardox 600 Hardness 600HB Wear Abrasion Resistant Steel Plates

HARDOX 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
HARDOX 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
HARDOX 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
HARDOX 600 Wear Abrasion Resistant Steel Plates - Available ex-stock
RAEX 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
RAEX 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
RAEX 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
FORA 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
FORA 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
FORA 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
CREUSABRO 4000 Wear Abrasion Resistant Steel Plates - Available ex-stock
CREUSABRO 4800 Wear Abrasion Resistant Steel Plates - Available ex-stock
CREUSABRO 8000 Wear Abrasion Resistant Steel Plates - Available ex-stock
CREUSABRO M (Hadfield) Wear Abrasion Resistant Steel Plates - Available ex-stock
ABRAZO 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
ABRAZO 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
ABRAZO 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
NICRODUR 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
NICRODUR 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
NICRODUR 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
BRINAR 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
BRINAR 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
BRINAR 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
DUROSTAT 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
DUROSTAT 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
DUROSTAT 500 Wear Abrasion Resistant Steel Plates - Available ex-stock
DILLIDUR 400V Wear Abrasion Resistant Steel Plates - Available ex-stock
DILLIDUR 450V Wear Abrasion Resistant Steel Plates - Available ex-stock
DILLIDUR 500V Wear Abrasion Resistant Steel Plates - Available ex-stock
JFE EVERHARD EH360 Wear Abrasion Resistant Steel Plates - Available ex-stock
JFE EVERHARD EH360LE Wear Abrasion Resistant Steel Plates - Available ex-stock
JFE EVERHARD EH400 Wear Abrasion Resistant Steel Plates - Available ex-stock
JFE EVERHARD EH500 Wear Abrasion Resistant Steel Plates - Available ex-stock
JFE EVERHARD EH500LE Wear Abrasion Resistant Steel Plates - Available ex-stock
SUMIHARD K340 Wear Abrasion Resistant Steel Plates - Available ex-stock
SUMIHARD K400 Wear Abrasion Resistant Steel Plates - Available ex-stock
SUMIHARD K500 Wear Abrasion Resistant Steel Plates - Available ex-stock
400HB Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
450HB Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
500HB Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
400 BHN Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
450 BHN Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
500 BHN Hardness Wear Abrasion Resistant Steel Plates - Available ex-stock
XAR 400 Wear Abrasion Resistant Steel Plates - Available ex-stock
XAR 450 Wear Abrasion Resistant Steel Plates - Available ex-stock
XAR 500 Wear Abrasion Resistant Steel Plates - Available ex-stock

Hardox® 500

The bendable, weldable and highly abrasion-resistant steel.

Hardox® 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance.

Hardox® 500 increases payload and increases service life while maintaining good processability and toughness.

Dimension Range

Hardox® 500 plate is available in thicknesses of 4.0 – 103 mm (5/32 - 4.06"), and Hardox® 500 sheet in thicknesses of 2.0 - 6.5 mm (0.079 - 0.256"). Hardox® 500 plate is available in widths up to 3350 mm (131.89") and lengths up to 14630 mm (575.98"). Hardox® 500 sheet is available in widths up to 1650 mm (64.96") and lengths up to 16000 mm (62.92"). More detailed information on dimensions is provided in the dimension program.

Available Standards

EN 10029

General Product Description
The bendable, weldable and highly abrasion-resistant steel.
Hardox 500 is a bendable and weldable abrasion-resistant steel, with a nominal hardness of 500 HBW. Suitable for applications that demand higher wear resistance. Hardox 500 increases payload and increases service life while maintaining good processability and toughness. Dimension Range Hardox 500 is available in thicknesses of 4.0 – 103 mm. Hardox 500 is available in widths up to 3350 mm and lengths up to 14630 mm. More detailed information on dimensions is provided in the dimension program.

Tolerances
More details are given in SSAB’s brochure 41-General Product Information Strenx, Hardox, Armox and Toolox-UK and Hardox®
Guarantees or at www.ssab.com.
Thickness
Tolerances according to Hardox Thickness Guarantees. Hardox® Guarantees meets the requirements of EN 10 029 Class A.
Length and Width
According to SSAB’s dimension program. Tolerances according to SSAB´s mill edge standards or tolerances that conform to EN 10
029.
Shape
Tolerances according to EN 10 029.
Flatness
Tolerances according to Hardox Flatness Guarantees Class D, which are more restrictive than EN 10 029.
Surface Properties
According to EN 10 163-2, Class A Subclass 1.
Bending
Tolerances are according to Hardox Bending Guarantees Class F.

Hardox® 550

At 550 HBW and with a toughness close to Hardox® 500

Hardox® 550, with a nominal hardness of 550 HBW and toughness close to Hardox® 500, increases wear life but not at the expense of crack integrity.

Dimension Range

Hardox® 550 is supplied in plate thickness of 8.0 – 65 mm, up to 2900 mm in width and up to 14630 mm in length. More detailed information on dimensions is provided in the dimension program.

Hardox® 600

The extra hard and tough steel for extreme wear

At a nominal hardness of 600 HBW, Hardox® 600 has a uniquely high impact toughness.

Especially suited for extreme wear conditions, it can still be cut and welded, making it an excellent choice for high-performance applications.

Dimension Range

Hardox® 600 is available in thicknesses of 6 – 65 mm. Hardox® 600 is available in widths up to 2000 mm and lengths up to 14630 mm. Preferred dimensions are 2000 x 4000 mm, other dimensons on request. More detailed information on dimensions is provided in the dimension program.


We mainly stock the Plates of following make :

Sumitomo Metal - Japan 
JFE Steel - Japan 
Kobe Steel - Japan
Japan Steel - Japan 
Nippon Steel - Japan
Salzgitter Mannesmann - Germany
ThyssenKrupp Steel - Germany
ThyssenKrupp Stahl - Germany
Dillinger Hutte - Germany
Rautaruukki - Finland
Voestalphine Grobblech - Austria
Corus - U.K
InduSteel - France
InduSteel - Belgium
SSAB - Sweden

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

 
If you have any requirement of above items, please feel free to contact us

Hardox 500/600 Plates

CONTACT US ::

Ashtapad Overseas

102 , 1ST Floor, Siddha Shila Building.,
Near Lilawati High School, 379 S.V.P. Road ,
Mumbai- 400004 (India).


Tel : +91-22-23841700
       +91-22-67437666
       +91-22-66595333
Fax : +91-22-23868298
E- Mail : export@ashtapad.com
Web : www.ashtapadoverseas.com

Alloy Steel Plate SA 387 / A 387 In the manufacturing of process heating equipments like boiler/ ducts / hot rollers / containers, if the temperature exceeds 450 Degree Centigrade and with in 550 Degree Centigrade, then boiler quality alloy steel plate can be efficiently used to fabricate Steam Drums, Mud Drums, Dished ends etc.
  
Alloy Steel Pipe SA 335 – A 335In the process heating like boiler/ chemical industries / paper, if the temperature exceeds 450 Deg c and with in 550 Deg c. then boiler quality alloy steel can be efficiently used for headers, risers, main steam lines etc. ASME specifies a set of Alloy Steel pipe specifications Which can be welded - Welding rod Specification is : E.8018.
  
A 106 /API 5L/A53 Gr.B SEAMLESS Pipes And TubesWe are the stockholders of carbon steel pipes and carbon steel tubes. We offer a huge array of pipes and tubes that are manufactured using high quality of steel and alloy. The standard sizes range from 15 NB up to 1200 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160.
  
Wear Resistant SteelAbrasion resistant carbons steel alloy for use in the harshest working environments such as the mining industry
  
  
Pressure Vessel SteelLow, medium and high yield carbon steel pressure vessel plates available for a variety of industrial applications
  
Boiler Steel PlateSupplied to a variety of specifications including ASME SA516 Grade 60 and ASME SA516 Grade 65
  
Chrome Moly SteelProviding increased strength and performance under high working temperatures, our chrome moly plate is available in a variety of types
  
Clad PlatesClad plates are a highly effective low cost steel plate alternative used readily by the construction and shipbuilding industry.
  
Structural SteelsUltra High Yield Plates supplied to the construction industry – just one example of the many different grades of steel we supply for structural use
  
HIC Resistant SteelHIC (hydrogen induced cracking) Resistant Steel is ideal for use in sour service / wet H2S working environments
  
  
  
Stainless Steel Plates A variety of grades available for use in anti–corrosive envrionments or for aesthetical puproses
  
Heat Resistant SteelAshtapad Overseas supplies steel which is ideal for high temperature working environments such as blast furnaces and incinerators
  
Structural Steel SectionsSteel sections including universal beams, universal columns, hot rolled angles and parallel flange rolled channels
  
Pipes/TubularsChampak Industries have a sizeable stockholding of seamless steel pipes and hollow sections
  
Hot Rolled PlateHigh quality hot rolled steel plate for the chemical, oil and gas industries
  
B 209/ B 209 MALUMINUM AND ALUMINUM ALLOY SHEET AND PLATE. GRADE ALLOY 1016 , 1060 TEMPER 0 , ALLOY 6061 , 6063 TEMPER H 12 H 14 ,T4,T6

People Also Search : equivalent material hardox, hardox 600 equivalent, hardox steel equivalent, equivalent hardox 450, hardox 400 equivalent astm, hardox 400 equivalente, hardox 400 equivalent, hardox 400 equivalent material

hardox 400 or equivalent, hardox 400 steel equivalent, equivalent to hardox 400, hardox 450 equivalent, hardox 450 astm equivalent, hardox 500 equivalent astm, hardox 500 equivalent, equivalent of hardox 500, hardox 550 equivalent, hardox plate equivalent, equivalente hardox 400, hardox equivalent
 
ASTM A588 Grade-A CORTEN-B High Strength Round Bars
14NiCrMo13-4 DIN 1.6657 832M13 Round Bars
SAE 4130 Quenched & Tempered Hollow Tubes & Bars
SAE 4130 Q&T Seamless Mechanical Tube & Pipe
ST-52 / ST 52-3N DIN 17100 Normalized Round Bars
ASTM A537 / ASME SA537 CL.2 Q&T Pressure Vessel Plates
AISI 4130 Q&T 75K API 6A Forged Round Bars
IS 2062 E450 D/E450 E SAILMA 450 SAILMA 450HI Plates
EN30B DIN 1.6747 4S28 835M30 AFNOR 30NCD16 Round Bars
S355J2W / S355J2W+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOW / S355JOW+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOWP / S355JOWP+N EN 10025-5 DIN 1.8946 EN 10155 Plates
SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2
API 5L X60 / X65 / X70 PSL2 Plates


Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex
Trademark Notice - Some names are trade names and/or trademarks of specific manufacturers. Ashtapad Overseas, Mumbai, India is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.