Hot Induction Bends
Hot Induction Bends
Hot Induction Bends
Density, ashtapad
 Hot Induction BendsProduct Catalog  
 Hot Induction BendsPipes/Tubes
 Hot Induction BendsHollow Sections
 Hot Induction BendsFittings/Flanges
 Hot Induction BendsPlates/Sheets/Coils
 Hot Induction BendsHot Rolled Steel Plates
 Hot Induction BendsHot Rolled Steel Sheets
 Hot Induction BendsHot Rolled Coils
 Hot Induction BendsRods/Bars/Wires
 Hot Induction BendsBars For Oil & Gas
 Hot Induction BendsForged Round Bars
 Hot Induction BendsHexagon Bars
 Hot Induction BendsSquare Bars
 Hot Induction BendsCold Drawn Bars
 Hot Induction BendsForged Disk/Circles
 Hot Induction BendsStructural Steels
 Hot Induction BendsFlat Bars/Strips
 Hot Induction BendsStuds/Bolts/Nuts
 Hot Induction BendsThreaded Bars/Rods
 Hot Induction BendsFasteners
 Hot Induction BendsSA193 B7 Stud Bolts
 Hot Induction BendsSA193 B16 Stud Bolts
 Hot Induction BendsSA194 2H HEX NUTS
 Hot Induction BendsCorten Steels
 Hot Induction BendsSAILCOR IRSM41
 Hot Induction BendsSpring Steel Bars
 Hot Induction BendsBoiler/PVQ Plates
 Hot Induction BendsStructural Plates
 Hot Induction BendsAlloy Steel Plates
 Hot Induction BendsShipbuilding Plates
 Hot Induction BendsLRS Grade-A/B Plates 
 Hot Induction BendsABS Grade-A/B Plates
 Hot Induction BendsDNV Grade-A/B Plates
 Hot Induction BendsBV Grade-A/B Plates
 Hot Induction BendsSABS 1431:1987 Steels
 Hot Induction BendsQ&T Steel Plates
 Hot Induction BendsPlate Sizes & Grades
 Hot Induction BendsSA516-60/70 HIC Tested
 Hot Induction BendsSA516-60/70 Plates
 Hot Induction BendsSA515-60/70 Plates
 Hot Induction BendsST52-3 DIN 17100
 Hot Induction BendsS355J2G3 EN 10025-2
 Hot Induction BendsS355K2G3 EN 10025-2
 Hot Induction BendsS355J2+N EN 10025-2
 Hot Induction BendsS355K2+N EN 10025-2
 Hot Induction BendsEN 10025-2 Plates
 Hot Induction BendsEN 10028-2/3 Plates
 Hot Induction BendsAbrasion Resistant Steel
 Hot Induction BendsWear Resistant Steel
 Hot Induction BendsHardox 400/450 Plates
 Hot Induction BendsHardox 500/600 Plates
 Hot Induction BendsWeldox 700 Plates
 Hot Induction BendsSAILMA 350/350HI Plates
 Hot Induction BendsSAILMA 410/410HI Plates
 Hot Induction BendsSAILMA 450/450HI Plates
 Hot Induction BendsSeamless Pipes/Tubes
 Hot Induction BendsWelded Pipes/Tubes
 Hot Induction BendsERW/EFW Pipes/Tubes
 Hot Induction BendsSAW/HFW Pipes
 Hot Induction BendsASTM A234/ASME SA234
 Hot Induction BendsASTM A403/ASME SA403
 Hot Induction BendsASTM A420/ASME SA420
 Hot Induction BendsASTM A860/ASME SA860
 Hot Induction BendsLong Radius Bends
 Hot Induction BendsHot Induction Bends
 Hot Induction BendsForged Fittings
 Hot Induction BendsForged Flanges
 Hot Induction BendsAPI 5L Line Pipes
 Hot Induction BendsAPI 5L Gr.B PSL1/2 Pipes
 Hot Induction BendsAPI 5L X42 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X46 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X52 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X56 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X60 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X65 PSL1/2 Pipes
 Hot Induction BendsAPI 5L X70 PSL1/2 Pipes
 Hot Induction BendsHigh Speed Steels
 Hot Induction BendsCold Work Tool Steels
 Hot Induction BendsHot Work Tool Steels
 Hot Induction BendsPlastic Moulding Steels
 Hot Induction BendsBS970 Specifications
 Hot Induction BendsSAE Specifications
 Hot Induction BendsJIS Specifications
 Hot Induction BendsASTM Standard Spec
 Hot Induction BendsASME Standard Spec
 Hot Induction BendsAerospace Alloys Spec
 Hot Induction BendsEquivalent Grades 
 Hot Induction BendsEquivalent Standards 
 Hot Induction Bends Technical Specifications
 Hot Induction BendsDIN Material No.
 Hot Induction BendsMechanical Properties
 Hot Induction BendsChemical Composition
 Hot Induction BendsDensity
 Hot Induction BendsTrade Leads
 Hot Induction BendsContact Us
 Hot Induction BendsLinks
Hot Induction Bends
 

Hot Induction Bends :

Manufacturers, Exporters, Stockist India & Suppliers Worldwide

Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India



Ashtapad is India's one of the leading steel flanges manufacture specialize in din flanges steel flanges asme flanges stainless flanges and others products Stainless steel, Carbon steel, Alloy steel, Nickel, Other Ferrous & Non-Ferrous metals In Shape Of steel fitting, steel elbow, ss Bend, steel forged Bend, steel buttweld Bend Etc.Suppliers of Stainless Steel Bend, wire, rod, Monel Bend, Inconel Bend, Alloy 20 Bend, Hastelloy Bend, Nickel Bend, steel bend, steel tee, steel reducer, Titanium Bend, Cupro Nickel Bend, Copper Bend, Brass Bend, Aluminum Bend, Phosphorus Bronze Bend, Gun Metal Bend Etc.

 

Hot Induction Bends

HOT INDUCTION BEND
Seamless Fittings – 1/2” to 24” Welded Fittings – 1/2” to 60”
Elbow LR & SR Bend, Crosses, Stub-End, Tee, Reducer, Flange, End Cap
Hot Induction Bends, Long Radius Piggable Bends, Induction Pipe Bending Bends
Long Radius Carbon Steel Bends, Long Radius High Yield Carbon Steel Bends
Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Long Radius Piggable Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Hot Induction Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
API-5L Hot Induction Long Radius Bends R-2D, R-3D, R-5D, R-6D, R-8D upto 22D
Induction Pipe Bending Bends 2D, 3D, 5D, 6D, 8D upto 22D
Induction Long Radius Pipe Bending Bends API 5L X42, X46, X52, X56, X60, X65, X70
Induction Long Radius Pipe Bending Bends API5LX-42, X-46, X-52, X-56, X-60, X-65, X-70
Long Radius Bends 30 Deg., 45 Deg., 60 Deg., 90 Deg., 180 Deg., 360 Deg. upto 60" Diameter
Long Radius Bends in API 5L X42, API 5L X46, API 5L X52, API 5L X56, API 5L Grade B
Long Radius Bends in API 5L X60, API 5L X65, API 5L X70, API 5L Grade-B
Long Radius Bends in API 5L X-42, API 5L X-46, API 5L X-52, API 5L X-56, API 5L Grade B
Long Radius Bends in API 5L X-60, API 5L X-65, API 5L X-70, API 5L Grade-B
SA-234 WPB, WPC, WP1, WP5, WP7, WP9, WP11CL7, WP12CL1, WP22, WP91
ASTM A-860 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WPHY-60, WPHY-65, WPHY-70
ASTM A-860 WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70
MSS SP75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WPHY 60, WPHY 65, WPHY 70
MSS SP75 WPHY42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70
MSS-SP-75 WPHY42, WPHY46, WPHY52, WPHY56, WHPY60, WHPY65, WPHY70
MSS-SP-75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WHPY 60, WHPY 65, WPHY 70
MSS-SP-75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WHPY-60, WHPY-65, WPHY-70
MSS SP75 WPHY42, WPHY46, WPHY52, WPHY56, WHPY60, WHPY65, WPHY70
MSS SP75 WPHY 42, WPHY 46, WPHY 52, WPHY 56, WHPY 60, WHPY 65, WPHY 70
MSSSP75 WPHY-42, WPHY-46, WPHY-52, WPHY-56, WHPY-60, WHPY-65, WPHY-70
ASTM A-234 WPB, ASTM A234 WPC, ASTM A234 WPB Seamless, ASTM A234 WPC Seamless
ASTM A-234 WP1, WP11 CL1, WP11 CL3, WP12 CL1, WP22 CL1, WP22 CL3
ASTM A-234 WP5 CL1, WP5 CL3, WP9 CL1, WP9 CL3, WP91
ASTM A-403 WP304, 304L, 304H, 310S, 316, 316L, 316H, 321, 321H, 347, 347H, 317, 317L
ASTM A-420 WPL3, WPL6, WPL8, WPL9
ASTM A-182 F304, F304L, F304H, F310S, F316, F316L, F316H, F321, F321H, F347, F347H, F348
ASTM A-182 F1, F11, F12, F22, F5, F9, F91, F92
ASTM A-182 F-1, F-11, F-12, F-22, F-5, F-9, F-91, F-92
ASTM A-694 F-42, ASTM A694 F-46, ASTM A694 F-52, ASTM A694 F-56
ASTM A-694 F-60, ASTM A694 F-65, ASTM A694 F-70, ASTM A694 F-80
SAE / AISI Grade 1008, 1010, 1018, 1020, 1025, 1026, 1040, 1045, 1050, 4130, 4140, 4150, 4340
AISI-4130 L-80 according to API-5CT, 75KSI according to API-6A Quenched / Hardened & Tempered
SAE-4130 L-80 according to API-5CT, 75KSI according to API-6A Quenched / Hardened & Tempered
AISI-4140 L-80, P-110 according to API-5CT, API6A, NACE MR-01-75 Quenched / Hardened & Tempered
SAE-4140 L-80, P-110 according to API-5CT, API6A, NACE MR-01-75 Quenched / Hardened & Tempered
Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN 10088 F51
Duplex ASTM A182 Grade F60 / ASME SA182 Grade F60 NACE & Norsok Approved
Duplex SAF2205 SANMAC, URANUS 45N, PREN=33, PREN=34, PREN=35, PREN=36 DIN 1.4462
Duplex-2205 UNS S31803 / UNS S32205 DIN-1.4462 EN 10088-3 PREN = 33, PREN = 34, PREN = 35
Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53
Super Duplex SAF 2507 UNS S32750 DIN 1.4410 EN-10088 URANUS 47N(+) PREN=41 Minimum
Super Duplex UNS S32760 F-55 ASTM A182 F55 SA182 F-55 DIN 1.4501 UNS 32760 F55

ASTM A-234 WPB, WPC
ASME A-234 WPB, WPC
CARBON STEEL ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS.

MSS-SP 75 WPHY 42, WPHY 46, WPHY 52, WHPY 60, WPHY 65, WPHY 70
HIGH YIELD CARBON STEEL ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS.

ASTM A-420 WPL6, WPL3
ASME A-420 WPL6, WPL3
LOW TEMPERATURE CARBON STEEL ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS.

ASTM A-234 WP5, WP9, WP11, WP12, WP22, WP91
ASME A-234 WP5, WP9, WP11, WP12, WP22, WP91
CHROME-MOLY ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS.

ASTM A-403 WP304, WP304L, WP304H, WP321, WP321H, WP316, WP316L, WP316H, WP347, WP347H, WP309, WP309S, WP310, WP310S STAINLESS STEEL ELBOWS LR, SR, BENDS, CROSSES, STUB ENDS, EQUAL TEES, UN-EQUAL TEES, CONCENTRIC REDUCERS, ECCENTRIC REDUCERS, CAPS.

ANSI B16.9
ANSI B16.28
MSS-SP 75
MSS-SP 43
DIN 2605, 2625, 2626, 2617
BS 1640

ASTM A-105
ASTM A-181 GR.I, GR.II
CARBON STEEL SLIPON FLANGES, BLIND FLANGES, WELD NECK FLANGES, THREADED & SOCKET WELD FLANGES, LAP JOINT FLANGES

ASTM A-182 F304, F304L, F316, F316L, F321, F321H, F347, F347H, F309S, F310S STAINLESS STEEL SLIPON FLANGES, BLIND FLANGES, WELD NECK FLANGES, THREADED & SOCKET WELD FLANGES, LAP JOINT FLANGES

ASTM A-182 F5, F9, F11, F12, F22, F91
CHROME-MOLY ALLOY STEEL SLIPON FLANGES, BLIND FLANGES, WELD NECK FLANGES, THREADED & SOCKET WELD FLANGES, LAP JOINT FLANGES

ANSI B16.5
MSS-SP 44
API 605
AWWA 207
BS TABLE D, E, F, H, J, K
ASA 150, 300, 600, 900, 1500, 2500 lbs
DIN ND 6, 10, 16, 25, 40

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

 
 

Density

CONTACT US ::

Ashtapad Overseas

102 , 1ST Floor, Siddha Shila Building.,
Near Lilawati High School, 379 S.V.P. Road ,
Mumbai- 400004 (India).


Tel : +91-22-23841700
       +91-22-67437666
       +91-22-66595333
Fax : +91-22-23868298
E- Mail : export@ashtapad.com
Web : www.ashtapadoverseas.com


Carbon Steel (SS) Duplex Steel, Stainless Steel, Alloy Steel, Nickel Alloy, Copper, Copper Alloy, Mild Steel, Kovar, Titanium, Brass, Aluminium, Duplex Steel, Super Duplex Steel, Tantalum, Nickel, Zirconium, Hastelloy, Incolloy, Cupro nickel, Niobium, Nimonics, HR Alloy, Alloy 20, Monel, Inconel, Super Duplex

 

Forged Fittings
Socket weld Fittings
Screwed Fittings
HighPressure Fittings
Elbow, Tee, Union
Cross, Swage Nipple
Coupling, Cap, Plug
Bushing, Boss, Insert
Outlets, Weldolet
Sockolet, Elbolet
Threadolet, Nipolet
Latrolet, Sweepolet
Flanges, nuts ferrules
swage nipple
welding boss
hexagon nipple
weldolets, sockolets
threadolets, nipolets
bared tee, letrolets
90 deg elbow

Swage Nipple
Barrel Nipple
Reducing Nipple
Long Stubend
Short Stubend
Dish End, laterals
Bend, Long Radius Bend
Piggable Bend
Hot Bend, 3D Bend
5D Bend, U Bend, J Bend , A 350 LF2 Forged Fittings , A 350 LF2 outlets
A 350 LF2 Flanges
Weld neck Flange


A 350 LF2 Bar
Customized Bend
Seamless Tube
Welded Tube
U Tube
Instrumentation tube
Capillary Tube
SA 179 Tube
SA 210 Tube
A 210 Tube
BS 3059 Tube
Electropolish Elbow
Electropolish Tee
Dairy Union nA
Electro Polish Tube
Seamless Pipe
Welded Pipe
Fabricated Pipe
Square Pipe
Rectangle Pipe
Plate, Sheet, Coil
Perforated Sheet
Chequered Plate
Bar, IBR Fitings
IBR Buttweld Fittings
IBR Bend, IBR Forged Fittings, IBR Outlets
IBR Flanges, IBR Pipe
IBR Tube, IBR Plate
IBR Bar, reducing bushing
reducer, pipe cap
s
Socket Weld Flanges
Slip On Flanges
Blind Flanges
Screwed Flanges
Low Temperature Bend
Low Temperature Buttweld Fittings
Low Temperature Forged Fittings
Low Temperature Outlets
Low Temperature Flanges
Low Temperature Pipe
Low Temperature Plate
Low Temperature Bar
LTCS Bend
LTCS Buttweld Fittings
LTCS Forged Fittings
LTCS Outlets, LTCS Flanges
LTCS Pipe, Boiler Plate
LTCS Bar, Fittings
flanges, slip on, weldneck
blind, lapjoint, spectacle
socketweld, threaded
ring joint, oriface, fasteners
nuts, socket screws, washers
bolts, anchor fasteners
wedge anchor, eye bolt
stud bolts, stud
threaded rod, cotter pin
fine fasteners, spares
screwed fittings, cross

sw elbow, bw elbow
45 deg elbow
, atw weld ring
coupling, pipe plug
hollow hex plug, elbow
reducing union
90 deg. union elbow

reducing tee
tribow

carbon Steel A234 Bend
Buttweld Fittings
Long Radius Elbow
Short Radius Elbow
90 Deg Elbow
45 Deg Elbow
180 Deg Elbow
barred Tee
Equal Tee
Reducing Tee
Concentric Reducer
Eccentric Reducer
pipe, pipe fittings
flanges, fasteners
strips, sheets
wires, round bar
elbows, tees
reducers, stubends
flanges, union
caps, nipples
couplings, elbow lets
weldolets, threadolets
bushing, tubes
plates, rods
circles, stub end
nipple, crosses
adapter, union tee
coupling, half coupling, bush
plug, Mitered Bend
caps plugs
vent protector
flanges
chromatograph fittings


female connector
male connector
manifold tee
locator union
extended run leg union tee
tube socket weld to pipe butt-weld
tube butt- weld to tube socket-weld
port connectors
A420 WPL6 Buttweld Fittings
A420 WPL6 Bend
A105 Forged Fittings
Carbon Steel A105 Outlets
Carbon Steel A105 Flanges
Carbon Steel A105 Bars
Carbon Steel A105 Valve
Long Weld Neck Flanges
Lapped Joint Flanges
Reducing Flanges
Spectacle Blind Flanges
Electropolish Fittings
foundation fasteners
tube fittings
union ball joint
reducing 90 deg. union elbow
extender leg 90 deg. union elbow
45 deg. union elbow

carbon Steel A234 Buttweld
carbon Steel Fittings
carbon Steel Seamless Fittings
carbon Steel Welded Fittings
carbon Steel Fabricated Fittings
carbon Steel Hydraulic Fittings
carbon Steel Instrumentation Fittings
carbon Steel A106 Pipe

 

 

 

 

 

 

 

 

ASTM A588 Grade-A CORTEN-B High Strength Round Bars
14NiCrMo13-4 DIN 1.6657 832M13 Round Bars
SAE 4130 Quenched & Tempered Hollow Tubes & Bars
SAE 4130 Q&T Seamless Mechanical Tube & Pipe
ST-52 / ST 52-3N DIN 17100 Normalized Round Bars
ASTM A537 / ASME SA537 CL.2 Q&T Pressure Vessel Plates
AISI 4130 Q&T 75K API 6A Forged Round Bars
IS 2062 E450 D/E450 E SAILMA 450 SAILMA 450HI Plates
EN30B DIN 1.6747 4S28 835M30 AFNOR 30NCD16 Round Bars
S355J2W / S355J2W+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOW / S355JOW+N EN 10025-5 DIN 1.8963 EN 10155 Plates
S355JOWP / S355JOWP+N EN 10025-5 DIN 1.8946 EN 10155 Plates
SA516 Grade 60/70 HIC Tested Plates NACE TM0284-2003 / NACE MR0175 / ISO 15156-2
API 5L X60 / X65 / X70 PSL2 Plates



Nickel - Monel® - Inconel® - Incoloy® - Hastelloy® - Alloy 20 - Duplex
Trademark Notice - Some names are trade names and/or trademarks of specific manufacturers. Ashtapad Overseas, Mumbai, India is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.